Your Position: Home > Product > Pump > OIL PUMP

NGM Series deep well pump

Update: 2015/3/28 View:
  • Brand: mindong eleceric/閩東電機
  • Type: NGM Series
  • Order Online
Introduction

NGM Series

Applications and installation

仅凹The NGM pumps are with one or two impellers. The two impeller pump can gain bigger flow rate. In fact they consist of two pumps connected in series, one is ejector-pump and the other is centrifugal pump. The ejector pump is lowered in well and connected to the centrifugal pump body by two pipes. These pumps are suitable for pumping clean water and chemically non-aggressive fluids. They are extremely reliable, economical and simple to use, finding many uses in domestic applications and the automatic distribution of water from small and medium-sized surge tanks form an automatic booster systems to supply water. The most remarkable character is it that they can be used to supply clean water from extremely deep well. To ensure adequate counter-pressure, it is always to install a foot valve with a filter on the suction opening.

次瓣Pumps should be installed in a covered area, protected against the weather. 

Operating limitations

Max ambient temperature up to 40

Max fluid temperature up to 80

Max pressure up to 10 bar 

Construction features

Pump Body: cast iron

Motor Housing: aluminum

Shaft: 45# steel /stainless steel

Impeller: Brass

Motor: closed, externally ventilated

Insulation Class: B/F

Protection Class: IP44/IP54

Duty: continuously rated 

Technical parameters



More Products